Should I quit or keep on fighting?
-
[quote name=“Ernesto” post=“43099” timestamp=“1386783680”]
In the test is that the vegetable oil is better than mineral oil coolant and air.
As vegetable oil is not derived from petroleum, does not attack the embedding in plastic components and oil components. Then it can be removed more easily the vegetable oil.(isopropyl alcohol)
The components are not going to ever wear, it is impossible to wear submerged in oil.:)
[/quote] -
Also keep in mind, you could always sacrifice some kh/s for undervolting + downclocking + lower noise + lower power consumption.
example: R9 280x’s may run @ ~1.07v 1000mhz/1250mhz with -g 2 -I 13 hashing @ about 680-690kh/s
fanspeed @ 50% temps @ 65-70°C (ambient 20°C);)
-
[quote name=“nimmneun” post=“43109” timestamp=“1386784585”]
Also keep in mind, you could always sacrifice some kh/s for undervolting + downclocking + lower noise + lower power consumption.example: R9 280x’s may run @ ~1.07v 1000mhz/1250mhz with -g 2 -I 13 hashing @ about 680-690kh/s
fanspeed @ 50% temps @ 65-70°C (ambient 20°C);)
[/quote]
^ that is a sound plan
[url=http://forum.feathercoin.com/index.php/topic,4176.msg32399.html#msg32399]http://forum.feathercoin.com/index.php/topic,4176.msg32399.html#msg32399[/url]
look into that thread, If i remember doing my calculations correctly you should be able to ROI faster optimizing for power due to your crazy $/KWh…
I run 2 settings, the first is an optimized all out setting getting me 740KH/s per 7970 and the second is my quiet power optimized setting 660KH/s that drops temps about 12c. -
[quote name=“Ernesto” post=“43101” timestamp=“1386783818”]
In the test is that the vegetable oil is better than mineral oil coolant and air.
As vegetable oil is not derived from petroleum, does not attack the embedding in plastic components and oil components. Then it can be removed more easily the vegetable oil.(isopropyl alcohol)
The components are not going to ever wear, it is impossible to wear submerged in oil.:)
[/quote]
That sounds good :)
But doesn’t vegetable oil get bad faster? Well, I will read about it a bit more and consider again :)[quote author=nimmneun link=topic=5844.msg43109#msg43109 date=1386784585]
Also keep in mind, you could always sacrifice some kh/s for undervolting + downclocking + lower noise + lower power consumption.example: R9 280x’s may run @ ~1.07v 1000mhz/1250mhz with -g 2 -I 13 hashing @ about 680-690kh/s
fanspeed @ 50% temps @ 65-70°C (ambient 20°C);)
[/quote]
I’ve been trying to undervolt. It seems that the core voltage is locked on these XFX R7970 cards, so it’s not so easy. The idea is good, but I just haven’t found a way yet.
[quote author=RIPPEDDRAGON link=topic=5844.msg43152#msg43152 date=1386791120]
look into that thread, If i remember doing my calculations correctly you should be able to ROI faster optimizing for power due to your crazy $/KWh…
I run 2 settings, the first is an optimized all out setting getting me 740KH/s per 7970 and the second is my quiet power optimized setting 660KH/s that drops temps about 12c.
[/quote]I have been reading and learning from your thread. Very impressive results!
But as mentioned above, undervolting didn’t go so easily for me. In Afterburner, the voltage is locked, so I did a combination of Afterburner and Trixx. After that, the speeds started dropping over time. It’s back to normal now, except it’s hashing somewhat slower than before. Around 667Kh/s per GPU. Anyway, I think I know the process of getting it back up, so I just need the time to do it.
Any clues on how to unlock the voltage clock on those XFX R7970 would be appreciated :)
-
Well, i stay go ahead and continue. Try explaining the situation to your roommates, and offer them some shares in your already built rig, theyll be interested then and will start to actually take interest in the mining rig instead of blaming you for the noise :p.
-
[quote name=“TheRedViper” post=“43162” timestamp=“1386793007”]
Well, i stay go ahead and continue. Try explaining the situation to your roommates, and offer them some shares in your already built rig, theyll be interested then and will start to actually take interest in the mining rig instead of blaming you for the noise :p.
[/quote]
I see your point, which S2 Bergen also made earlier in this thread. I’ll see if I can spread the love for mining ;) -
[quote name=“nimmneun” post=“43109” timestamp=“1386784585”]
Also keep in mind, you could always sacrifice some kh/s for undervolting + downclocking + lower noise + lower power consumption.example: R9 280x’s may run @ ~1.07v 1000mhz/1250mhz with -g 2 -I 13 hashing @ about 680-690kh/s
fanspeed @ 50% temps @ 65-70°C (ambient 20°C);)
[/quote]yes undervolting will drop temps alot
-
my rigs actually are serving as my heater in my apartment lol
-
[quote name=“colsteel” post=“43285” timestamp=“1386816448”]
yes undervolting will drop temps alot
[/quote]Yes, I have to work on figuring out how to do that on those XFX’s.
[quote author=colsteel link=topic=5844.msg43287#msg43287 date=1386816545]
my rigs actually are serving as my heater in my apartment lol
[/quote]
I know what you mean. The heater in my bedroom is off during the day while my daily PC is mining :P -
^ that is a sound plan
[url=http://forum.feathercoin.com/index.php/topic,4176.msg32399.html#msg32399]http://forum.feathercoin.com/index.php/topic,4176.msg32399.html#msg32399[/url]
look into that thread, If i remember doing my calculations correctly you should be able to ROI faster optimizing for power due to your crazy $/KWh…
I run 2 settings, the first is an optimized all out setting getting me 740KH/s per 7970 and the second is my quiet power optimized setting 660KH/s that drops temps about 12c.
[/quote]
^
This is exactly what i do. Because my wife doesn’t like the fans, personally find it soothing, I work in a server room a lot. Typically run my cards at 75degrees, at 650Kh/s fans at 65 or so. Anything above that and the noise gets excessive for the spouse.