Rig stats and pics
-
Nice! You can add 73c to my card if you like :).
-
I have a 5770 between 180 and 200 kh
a 5870 between 375 and 400kh -
wow… guys running rigs at 80c+?..
I got:
2x 7870 420kh each at 75c
2x 7790 300kh each at 70cI was quite impressed with the 7790 (didnt look at stats before i bought)… for those that want to best bang for the buck… $150 card doing 300kh and is extremely power efficient.
-
Updated the new temps and cards :)
Yeah my 7950 is running just under 80c it’s at around 78c but the 7950 can apparently take a lot more heat than other cards.
-
My rig certainly isn’t fast by any means. But I have a XFX 6670 with 1gb of ddr5. I get around 105-110 kh/s it’s also paired with my a6-3670k apu that gets about 50 kh/s.
Edit: the apu gets about 50 actually. it’s got a nice overclock on it. Also the Gpu stays near 52 C and the processor stays near 30 C
-
[quote]wow… guys running rigs at 80c+?..[/quote]Yep! Mine’s at 81. Damn cooler can barely handle this high OC…
-
[quote]for those that want to best bang for the buck… $150 card doing 300kh and is extremely power efficient[/quote]How do they compare tothe 7950s?
-
[quote name=“samdawghomie” post=“3222” timestamp=“1368515964”]
My rig certainly isn’t fast by any means. But I have a XFX 6670 with 1gb of ddr5. I get around 105-110 kh/s it’s also paired with my a6-3670k apu that gets about 40 kh/s.
[/quote]My first rig was my laptop at 8KH/s haha
-
485 kh/s – 1x 7950 in an ESXi in passthrough mode. Can’t change the clock on it unless I plus a monitor/keyboard and mouse…
2150 kh/s – 3x 7970 Sapphire OC @ 69c. One riser, open case with fans.
1800 kh/s – 3x 7970 Gigabyte OC @ 65c. Can’t overclock much because of voltage lock. Tried flashing, flash worked but still voltages are locked. -
4 x 7950 @ 500 only Stock ( for long life) Temp 59 - 72
1 x 4840 @ 100
1 x 6870 @ 233 go not higher :( -
[quote name=“samdawghomie” post=“3222” timestamp=“1368515964”]
My rig certainly isn’t fast by any means. But I have a XFX 6670 with 1gb of ddr5. I get around 105-110 kh/s it’s also paired with my a6-3670k apu that gets about 50 kh/s.Edit: the apu gets about 50 actually. it’s got a nice overclock on it. Also the Gpu stays near 52 C and the processor stays near 30 C
[/quote]
The APU rates seem fairly nice for it only being a dual core sporting a 6350D intergrated. My Llano 3400 with it’s 6410D has never seen rates beyond 5khash GPU side >~<Still! Every little helps!
-
List updated. I’m sure after a while we will have a great list for people to have a look at.
-
Yeah :)
In case anyone wants to know, my parameters are:
–worksize 256 --lookup-gap 2 --thread-concurrency 5824 -g 1 --intensity 19 -
Hi!
I am running a rig with two 6990s getting an average hash of 1750 kh/s in total at 85 - 90°C per card and besides this system, I also have a 5970 in my work computer, which is hashing at an average rate of 675 kh/s at 75°C.
Both systems use standard air cooling.
-
Card 1 7950 615Khash 54°C
Card 2 7950 615Khash 69°C
Card 3 7950 615Khash 69°C
Card 4 7950 615Khash 69°C
(No overclocking, All 4 cards cooled with a single 150mm 20Watt Fan, Speed Average over 1 week)(In Overclocking tests I can get cards up over 700Khash each, but I have done no long duration runs)
Card 1 7950 665Khash 61°C
Card 2 7950 666Khash 72°C
Card 3 7950 664Khash 71°C
Card 4 7950 664Khash 73°C
(All 4 cards cooled with a single 150mm 20Watt Fan, Speed Average over 1 day, temp is max reported over a day, temp average is lower, about 66°C for the 3 hotter cards, less again for the coolest card)
(Overclocking, afterburner settings are power limit at 20%, core clock at 1100Mhz and memory clock at 1350Mhz)My final long test will push the cards to near max, using power limit at 20%, core clock at 1200Mhz and memory clock at 1400Mhz, my only problem is to keep the heat down, I will probably use some form of ducting like christian has suggested.
-
[quote name=“pyxis” post=“4295” timestamp=“1368872584”]
Card 1 7950 615Khash 54°C
Card 2 7950 615Khash 69°C
Card 3 7950 615Khash 69°C
Card 4 7950 615Khash 69°C
(No overclocking, All 4 cards cooled with a single 150mm 20Watt Fan, Speed Average over 1 week)(In Overclocking tests I can get cards up over 700Khash each, but I have done no long duration runs)
[/quote]
Can you post your parameters for those 700 Khash speeds? Like the command used to start cgminer with the correct settings to reach that. I haven’t gone all the way out, I reach about 650 steady at 73C . -
My machine just crashed! :(.
I can’t reboot it till tuesday.
-
[quote name=“ChristianRiesen” post=“4303” timestamp=“1368877904”]
[quote author=pyxis link=topic=264.msg4295#msg4295 date=1368872584]
Card 1 7950 615Khash 54°C
Card 2 7950 615Khash 69°C
Card 3 7950 615Khash 69°C
Card 4 7950 615Khash 69°C
(No overclocking, All 4 cards cooled with a single 150mm 20Watt Fan, Speed Average over 1 week)(In Overclocking tests I can get cards up over 700Khash each, but I have done no long duration runs)
[/quote]
Can you post your parameters for those 700 Khash speeds? Like the command used to start cgminer with the correct settings to reach that. I haven’t gone all the way out, I reach about 650 steady at 73C .
[/quote]I use GUIMiner and MSI afterburner, afterburner settings are power limit at 20%, core clock at around 1200Mhz and memory clock at 1400Mhz max, I have had a constant 710Khash but I ran it only for 1 hour as I had no cooling. I have not yet carried out longer tests so I don’t know if 700plus speeds can be maintained very long.
Hope this helps, hope I don’t blow up my rig :) All in the name of science, fun and coins. ;D
-
4870 @ 100kh/s (retired until I can x-fire it with another 4870)
6950 (unlocked to 6970) @ 240kh/s (needs work to optimise) currently getting CGminer crashes at 13 intensity… -
[quote name=“Kagemusha” post=“4352” timestamp=“1368908808”]
4870 @ 100kh/s (retired until I can x-fire it with another 4870)
6950 (unlocked to 6970) @ 240kh/s (needs work to optimise) currently getting CGminer crashes at 13 intensity…
[/quote]
Just as a hint, crossfire does nothing to improve hashrates, in fact it can even lower them.