ASUS R290x Mining config
-
Give this a try:
“intensity” : “20”,
“vectors” : “1”,
“worksize” : “256”,
“lookup-gap” : “2”,
“thread-concurrency” : “33792”,
“gpu-engine” : “1025”,
“gpu-fan” : “40-100”,
“gpu-memclock” : “1350”,
“gpu-powertune” : “20”
“temp-cutoff” : “99”,
“temp-overheat” : “95”,
“temp-target” : “90”,“api-port” : “4028”,
“expiry” : “120”,
“failover-only” : true,
“gpu-threads” : “1”,“log” : “5”,
“queue” : “1”,
“scan-time” : “60”,
“temp-hysteresis” : “3”,“scrypt” : true,
“kernel” : “scrypt”,
“kernel-path” : “/usr/local/bin”
} -
Thanks for the reply , I have tried but it is getting worse only 6xx . Sometimes it look like frozen.
I want to buy 7790 before but out of stock!.. :-[
Just hope they will update the driver and got better result soon!
Any more suggestion?
-
Give this a try: [url=http://bit.ly/1f4H89e]http://bit.ly/1f4H89e[/url]
[sub]There are like a thousand settings out on the internet, u tried them all already?[/sub]
-
This gives me 875khash/sec (XFX 290 flashed to asus 290x bios)
“api-allow” : “W:127.0.0.1”,
“api-listen” : true,
“api-mcast-port” : “4028”,
“api-port” : “4028”,
“expiry” : “120”,
“hotplug” : “5”,
“kernel-path” : “/usr/local/bin”,
“log” : “5”,
“queue” : “1”,
“scan-time” : “30”,
“scrypt” : true,
“shares” : “0”,
“gpu-threads” : “1”,
“gpu-dyninterval” : “7”,
“gpu-engine” : “0-0”,
“gpu-fan” : “0-0”,
“gpu-platform” : “0”,
“gpu-memclock” : “0”,
“gpu-memdiff” : “0”,
“gpu-powertune” : “0”,
“gpu-vddc” : “0.000”,
“intensity” : “20”,
“temp-target” : “95”,
“temp-overheat” : “95”,
“temp-cutoff” : “99”,
“temp-hysteresis” : “3”,
“vectors” : “1”,
“worksize” : “512”,
“lookup-gap” : “2”,
“thread-concurrency” : “27400”,
“no-pool-disable” : true -
[quote name=“sl1982” post=“42705” timestamp=“1386709089”]
This gives me 875khash/sec (XFX 290 flashed to asus 290x bios)[/quote]
Thanks for the help but still get similar result. Maybe is the brand problem. Asus card sucks!
-
Hi there I have 2 xfx 290x units and I can only get 750 tops using the settings in this thread. Maybe it is the cgminer version we are using?
I was expecting 1000 or so
-
[quote name=“wildchild22” post=“42991” timestamp=“1386767321”]
Hi there I have 2 xfx 290x units and I can only get 750 tops using the settings in this thread. Maybe it is the cgminer version we are using?I was expecting 1000 or so
[/quote]I used 3.4.1 before and test 3.6.2 and 3.7.2 all get similar result . what is your version?
-
My only other guess is that your card is throttling. Can you get GPU tweak and see if your speed stays at 1000MHz or close to it? If it is dropping by a fair amount you may need to turn up the fans higher. Yes it sounds like a hairdryer but its the only way to keep temperatures in check.
-
I am using 3.72 and these settings yield 840
“api-allow” : “W:127.0.0.1”,
“api-listen” : true,
“api-mcast-port” : “4028”,
“api-port” : “4028”,
“expiry” : “120”,
“hotplug” : “5”,
“log” : “5”,
“queue” : “1”,
“scan-time” : “30”,
“scrypt” : true,
“shares” : “0”,
“gpu-threads” : “1”,
“gpu-dyninterval” : “7”,
“gpu-engine” : “875”,
“gpu-fan” : “50”,
“gpu-platform” : “0”,
“gpu-memclock” : “1500”,
“gpu-memdiff” : “0”,
“gpu-powertune” : “30”,
“gpu-vddc” : “0.000”,
“intensity” : “20”,
“temp-target” : “95”,
“temp-overheat” : “95”,
“temp-cutoff” : “99”,
“temp-hysteresis” : “3”,
“vectors” : “1”,
“worksize” : “512”,
“lookup-gap” : “2”,
“thread-concurrency” : “27400”
} -
[quote name=“sl1982” post=“43866” timestamp=“1386957196”]
My only other guess is that your card is throttling. Can you get GPU tweak and see if your speed stays at 1000MHz or close to it? If it is dropping by a fair amount you may need to turn up the fans higher. Yes it sounds like a hairdryer but its the only way to keep temperatures in check.
[/quote]- rep!! ;D
-
Also, try gpu-threads 2
-
[quote name=“wildchild22” post=“44050” timestamp=“1386985429”]
I am using 3.72 and these settings yield 840}
[/quote]Thanks you Now it is better :) Thanks a lot