R9 270 - Tweaking - \[BAMT SMOS\]
-
Calem those rates are amazing! I have two Saphire 270x’s and I can’t push either of them above 375KH/s
I tried your settings and it crashed instantly. I’m starting to wonder if my cards are just not up to scratch…
-
Damn… What Os are you running?
Maybe you should try what I’m doing by booting off usb with BAMT SMOS.
That could be difference maybe? Windows has a lot of crap running that just isn’t necessary for mining.
I really honestly wouldn’t know why I can push my 270 further than your 270x.
-
I’m using Windows 7 x64.
An OS built specifically for mining eh?! Thanks I’ll check it out.
-
hey since we talking about the r9 270x card I was wondering if it is possible to run 2 different cards. I am running right now Sapphire HD 7850 2gb on windows 7 64 bit. It has 750 or 800 watt ultra power supply on ASUS M2N-SLI mother board im pretty sure it has 2 PCI e spots. I just want to make sure I can run them both " current sapphire card with r9 270x card " with no problems if not no biggie friend is actually going to military so he just giving me the card before he leaves.
-
[quote name=“DARKANGEL6415” post=“49018” timestamp=“1388641852”]
hey since we talking about the r9 270x card I was wondering if it is possible to run 2 different cards. I am running right now Sapphire HD 7850 2gb on windows 7 64 bit. It has 750 or 800 watt ultra power supply on ASUS M2N-SLI mother board im pretty sure it has 2 PCI e spots. I just want to make sure I can run them both " current sapphire card with r9 270x card " with no problems if not no biggie friend is actually going to military so he just giving me the card before he leaves.
[/quote]I believe you can. Don’t quote me on it though. I’ve seen rigs with 2 diff cards in em, so I’m assuming it’s ok.
-
I’m running a 270x with a 7850, it works just use 2 different instances of cgminer
-
nice your answer fits my question down to the dot. So you pretty much just have like 2 tabs open in the guiminer one for the 7850 and one for the r9 270x? Also what power supply do you use to keep them both nice and stable if I may ask and are you also on windows 7?
-
Just to chime back in here…
After more fiddling I’ve managed to get my hashes up to 425KH/s stable with no HW error @ 70C
I had heard that the R9 cards couldn’t handle intensity above 13 so hadn’t raised it above that. I decided to take the plunge last night and after some testing settled on 19.
I’ve still a way to go before I get where I want (450-480) but things are improving.
I’m in the process of writing BAMT SMOS to a USB drive and will report back once I have it up and running…
For those who are interested here’s my .conf
“intensity” : “19”,
“vectors” : “1”,
“worksize” : “256”,
“kernel” : “scrypt”,
“lookup-gap” : “2”,
“gpu-engine” : “1000”,
“thread-concurrency” : “10240”,
“gpu-memclock” : “1500”,
“gpu-memdiff” : “0”,
“gpu-powertune” : “20”,
“gpu-vddc” : “0.000”,
“temp-cutoff” : “85”,
“temp-overheat” : “80”,
“temp-target” : “72”,
“api-listen” : true,
“api-mcast-port” : “4028”,
“api-port” : “4028”,
“auto-fan” : true,
“expiry” : “120”,
“failover-only” : true,
“gpu-dyninterval” : “7”,
“gpu-threads” : “1”,
“log” : “5”,
“no-pool-disable” : true,
“queue” : “2”,
“scan-time” : “40”,
“scrypt” : true,
“temp-hysteresis” : “3”,
“shares” : “0”,
“no-submit-stale” : true,
“kernel-path” : “/opt/miners/cgminer/bin”
}If any one has any suggested changes I’d love to hear them ;D
-
Me again.
BAMT SMOS installed and is giving me about another 10-15KH/s over Windows 7 x64 - every little helps!
Love the browser monitoring!
Calem, have you got any fail safes in place for crashing etc? On my Windows miner I had batch files to quit all programs, reboot and restart mining once a day just in case of any issues. I never actually had any issues but it was just peace of mind for me.
-
I don’t have any fail safes… I was hoping these lines in the conf file was what was keeping me from going “whoomfka!”
[quote]“temp-cutoff” : “85”,
“temp-overheat” : “80”,
“temp-target” : “72”,[/quote]Not sure if I’m using those exact numbers, but I haven’t made any changes to them on my SMOS install.
Also, I think there’s a way to set up SMOS so it auto starts mining when it powers up. Just not sure how to do it. Haven’t looked into it.
Tonight, I’ll have a look through your conf and see if I can suggest any tweaks.
-
[quote name=“Calem” post=“49321” timestamp=“1388704774”]
I don’t have any fail safes… I was hoping these lines in the conf file was what was keeping me from going “whoomfka!”[quote]“temp-cutoff” : “85”,
“temp-overheat” : “80”,
“temp-target” : “72”,[/quote]Not sure if I’m using those exact numbers, but I haven’t made any changes to them on my SMOS install.
Also, I think there’s a way to set up SMOS so it auto starts mining when it powers up. Just not sure how to do it. Haven’t looked into it.
Tonight, I’ll have a look through your conf and see if I can suggest any tweaks.
[/quote]Thanks bud!
EDIT: I’m a perpetual fiddler! Got it up to 480KH/s buy changing to thread concurrency to 16000. Weirdly if I use the same settings in Windows I get HW errors all over the shop! At the moment, using BAMT I have 0.00% invalid shares. I presume this mean I’m not getting hardware errors as I can’t see any HW error reporting in the browser monitering tool?
-
[quote name=“finalbillybong” post=“49331” timestamp=“1388706499”]
Got it up to 480KH/s buy changing to thread concurrency to 16000. Weirdly if I use the same settings in Windows I get HW errors all over the shop! At the moment, using BAMT I have 0.00% invalid shares. I presume this mean I’m not getting hardware errors as I can’t see any HW error reporting in the browser monitering tool?
[/quote]Oh excellent!
BAMT SMOS FTW
Nice going ahy!.
-
[quote name=“Calem” post=“49321” timestamp=“1388704774”]
Also, I think there’s a way to set up SMOS so it auto starts mining when it powers up. Just not sure how to do it. Haven’t looked into it.Tonight, I’ll have a look through your conf and see if I can suggest any tweaks.
[/quote]After some research it would appear SMOS starts mining automatically when it starts.
-
I now have the amount of power the whole rig draws.
230 Watts
480Khash/s
75°c. -
Thats low wattage! Well done!
-
[quote name=“finalbillybong” post=“50041” timestamp=“1388948959”]
Thats low wattage! Well done!
[/quote]It is? Well that’s good. I’m still yet to learn about/try out under volting so hopefully I’ll get this running even more efficiently. Hopefully I’ll pick up my second 270 tomorrow, so I’ll see how the watts go from there.
-
I’ve got my second card in now… Catch is, the pool tells me I’m hashing between 950 and 1050. But cgminer/smos can’t see it. It’s simply not registering in the terminal. its not giving me any indication I’m mining.
I know I am hashing though. The cards spun up and my pool is reporting im accepting shares. so this is all a bit strange. I’m thinking of trying a different usb distro…
oh. I’m still using about 235 watts as well.
-
Did you run [code]aticonfig --adapter=all --initial -f [/code]again ?
what does [code]cgminer -n[/code] say -
I’ll have a look.
Is this to be run from terminal or does the aticonfig line go in my bamt.conf?
It’s registering both of my gpu’s on 0 and 1. but yeah. when i start the miner nothing detects the hashes… just my pool… all though, i think i made a change somewhere and now that’s not even working… ive turned it all off for a bit but ill check out those 2 lines soon and let you know.
thank you for your help ahy
-
[quote name=“prensel” post=“50386” timestamp=“1389077891”]
Did you run [code]aticonfig --adapter=all --initial -f [/code]again ?
what does [code]cgminer -n[/code] say
[/quote]so the first line i put into terminal pumped out this
[quote]unitialised file found, configuring.
using /etc/x11/xorg.conf
and also saved a backup but i havent bothered typing out this line.[/quote]cgminer -n
file not found.do i need to navigate to a directory other than home?