[Dev] NeoScrypt Hardware Comparison Site
-
That’s great I think a lot of people would find that useful including myself.
If you want to add this I’m currently mining with 3 x gigabyte 750ti and getting around 40khs per card. I’ll add my config and exact card specs once I get home from work tonight. :)
-
I’ll add them once i have more details :P will work on it more in a few hours, as im little busy right now
-
Hey Spartan, glad to see you stuck around, even happier to see you are working on this project! ;D 8)
-
I should version my kernels so people know what they’re running for this…
-
I should version my kernels so people know what they’re running for this…
That would be great, also would help show how newer kernels effect performance with the same card, and how hardware progresses
Then we can look back in 5 years and see how our awesome expensive gtx 980 managed like whatever hashrate and power, and see how our brand new GTX 1337 Ti Z Black Edition with dual chips @ 2GHz with 16gb gddr6 vram 1024bit @ 16GHz and 8192 cuda cores each while only consuming 24w produces 50Mh/s xD
Will certainly be interesting to see more cards specs & rates when i can collect more info
-
Looks good, all it needs now is to full the table :)
-
That would be great, also would help show how newer kernels effect performance with the same card, and how hardware progresses
Then we can look back in 5 years and see how our awesome expensive gtx 980 managed like whatever hashrate and power, and see how our brand new GTX 1337 Ti Z Black Edition with dual chips @ 2GHz with 16gb gddr6 vram 1024bit @ 16GHz and 8192 cuda cores each while only consuming 24w produces 50Mh/s xD
Will certainly be interesting to see more cards specs & rates when i can collect more info
This will be the last iteration of DDR, though! :P
-
Looks good, all it needs now is to full the table :)
Certainly, any CPU’s or GPU’s you have that you could test with?
This will be the last iteration of DDR, though! :P
Technically GDDR5 is QDR, as it is “Quad Pumped” rather than “Double Pumped”, looked at the wikipedia page to clarify, its got all sorts of bits per pin per clock - no idea what they are but i do know GDDR5 is “Quad Pumped”, hence effective frequency is 4x its actual frequency
Octa Pumped memory could make things very interesting, we’d have graphics cards with 128GB/s+ memory bandwidth @ 1GHz actual frequency on 128 bit interfaces, never mind 256 / 384 / 512 bit interfaces. lol @ 512 bit 2GHz actual, 16GHz effective… 1TB/s effective data rate O.o
Anyway…
Please send me your hardware info and hashrates
Send me your cards details (manufacturers page is very useful), i shall add a submission page on the site shortly (trying to learn html + php for forms xD) which will make this easier.
Any overclock info you have applied and fanspeeds/profiles, also write if you are using a custom bios, e.g R9 270X bios on a HD 7870, or other modified bios.
Temperatures are welcome too, this can show if people are doing something wrong, also list if it is watercooled or not, as this will obviously effect temps
For proofs:
-
screenshot of your miner software
-
screenshot of EITHER (or both if you’re mining with both CPU and GPU at once like me)
-CPU-z (if its a cpu)
-GPU-z with both pages open at once (monitor and info)
Upload screenshots somewhere and post a link along with your miner config (remove any information you dont wish to share)
This is so i can add more accurate and detailed info :D
I will upload an example submission
-
-
############### Example Submission ###############
Type: CPU
Hashrate: 4.41 Kh/s
Vendor: Intel
Model: Pentium T4400
Est. Power: 35w
Miner: cpuminer-neoscrypt
Proof: https://dl.dropboxusercontent.com/u/105929805/cpu_proof.png
Extra info: Takes a while for the pool to accept work initially, then it drops worker diff and work is a little faster, temps stay low (about 55c). Whole laptop consumes about 35w (reading from wall with battery removed, running on ac power)
-
It’s not clear to me if the power consumption is just the card or the whole system when I sse the GTX 660 at 145 watts.
I run a Geoforce 750 ti at 70/135 watt (card/system)
-
Power consumption is the estimated power of the card, it will be a little higher than the actual power consumption, but it gives headroom when chosing a powwr supply, the 660ti in the table is 145w TDP, and it runs at about 92%, for estimate of around 133w ( updated the table to show est. power)
Also the 750Ti they only have a TDP around like 60-65w (i think), the 660Ti has a TDP of 145w, its the new maxwell architecture being very power efficient :D it consumes less power than most other cards, and produces a very nice hashrate
Edit #2: Power consumption is the estimated power consumption for that device. you can put total system config/total power in extra notes :)
-
Would someone be able to make a post about this on the Phoenixcoin forums? If there are any that is :D
-
Hows about a twitter post from @neoscrypt too?
-
I’ve cross posted this on the phoenixcoin forum.
Here
https://cryptocointalk.com/topic/22617-neoscrypt-gpu-cpu-miner-comparison/Also on a side note could you add a donation FTC address as I’d like to tip you for all the hard work you have been putting in on this. (Plus I can’t see signatures on my mobile)
-
Hows about a twitter post from @neoscrypt too?
Would be awesome :D
I’ve cross posted this on the phoenixcoin forum.
Here
https://cryptocointalk.com/topic/22617-neoscrypt-gpu-cpu-miner-comparison/Also on a side note could you add a donation FTC address as I’d like to tip you for all the hard work you have been putting in on this. (Plus I can’t see signatures on my mobile)
Added a donation address at the bottom of the main post :D will try see if i can add a donation address into the site aswell, if i can find a nice place to put it without it looking ugly or anything :)
-
100FTC on the way!
Keep working ;)
-
Holy… O.o thanks! i’d better get my brain in gear and get coding!
I’m working on the new submission page now, it will take a while to be actually functional since i have never properly worked with html form submissions and php before xD it’s both a learning experience and a cool project for a cool community :D
-
Holy… O.o thanks! i’d better get my brain in gear and get coding!
I’m working on the new submission page now, it will take a while to be actually functional since i have never properly worked with html form submissions and php before xD it’s both a learning experience and a cool project for a cool community :D
Sending 500, faster! :D
-
Send me a html/jquery/php programming guide while you’re at it :P JK! thanks! i really appreciate your support, i didnt expect it to get so much attention at first lol
I aim to get the new submissions page complete by mid weekend, and to start work on a login page for administration (to allow confirmations of new submissions etc)
I didnt get to sleep last night so im gonna crash out on the bed for a few hours, will continue work whatever time im can tomorrow :D
Syd
-
Certainly, any CPU’s or GPU’s you have that you could test with?
Technically GDDR5 is QDR, as it is “Quad Pumped” rather than “Double Pumped”, looked at the wikipedia page to clarify, its got all sorts of bits per pin per clock - no idea what they are but i do know GDDR5 is “Quad Pumped”, hence effective frequency is 4x its actual frequency
Octa Pumped memory could make things very interesting, we’d have graphics cards with 128GB/s+ memory bandwidth @ 1GHz actual frequency on 128 bit interfaces, never mind 256 / 384 / 512 bit interfaces. lol @ 512 bit 2GHz actual, 16GHz effective… 1TB/s effective data rate O.o
Anyway…
Please send me your hardware info and hashrates
Send me your cards details (manufacturers page is very useful), i shall add a submission page on the site shortly (trying to learn html + php for forms xD) which will make this easier.
Any overclock info you have applied and fanspeeds/profiles, also write if you are using a custom bios, e.g R9 270X bios on a HD 7870, or other modified bios.
Temperatures are welcome too, this can show if people are doing something wrong, also list if it is watercooled or not, as this will obviously effect temps
For proofs:
-
screenshot of your miner software
-
screenshot of EITHER (or both if you’re mining with both CPU and GPU at once like me)
-CPU-z (if its a cpu)
-GPU-z with both pages open at once (monitor and info)
Upload screenshots somewhere and post a link along with your miner config (remove any information you dont wish to share)
This is so i can add more accurate and detailed info :D
I will upload an example submission
But I’m on Linux!
-
