Mining Optimization for Power Consumption
-
yea i was doing that to. adjusting the cards on the fly is great for tweaking. my brothers and me are going to be placing rigs in multiple locations so this will be great in case we need to remote in and adjust stuff with out stopping the mining.
The Coin must Flow!!!
-
[quote name=“colsteel” post=“40952” timestamp=“1386394339”]
The Coin must Flow!!! [/quote]Muad’dib!
-
Here is an update for everyone:
My 6x Sapphire R9 280x are still back ordered no ETA
My 2x Gigabyte R9 280x Rev 2 are awesome but voltage locked…ughThe gigabytes are running at 730 and 750 KH/s sitting about 80c in a rackmount chassis. I am planning on flashing each of the 2 bios to my power optimized settings so that I can control the voltages on the video cards. I don’t have power consumption numbers for these cards yet. As some of us mining on windows have seen, the first GPU in the set of GPUs seems to be running slower than everyone else no matter what. I run 1050/1500 on GPU 1 and 1080/1500 on GPU 2 both with a TC of 21105… GPU 1 can’t run at 1080/1500 at all. Another piece of that puzzle is that I use the same OS on all of my mining rigs…none of them work with standard TC settings for miners, when set to 8192 for 7970s or 24000 for 7950s I get low hash rates.
-
You can set the Gigabytes to 1.075V through Atiflash.
The temp goes down to 70 degrees and still running 725-730kH/s -
What are you using and how are you measuring card watts? Thank you
-
[quote name=“prensel” post=“46200” timestamp=“1387470475”]
You can set the Gigabytes to 1.075V through Atiflash.
The temp goes down to 70 degrees and still running 725-730kH/s
[/quote]You have the bios?
-
Can you control the card voltage using CGminer command line?
-
Here is the modified bios for the R9 280x -> 1.075v
-
[quote name=“RIPPEDDRAGON” post=“46194” timestamp=“1387469687”]
Here is an update for everyone:My 6x Sapphire R9 280x are still back ordered no ETA
My 2x Gigabyte R9 280x Rev 2 are awesome but voltage locked…ughThe gigabytes are running at 730 and 750 KH/s sitting about 80c in a rackmount chassis. I am planning on flashing each of the 2 bios to my power optimized settings so that I can control the voltages on the video cards. I don’t have power consumption numbers for these cards yet. As some of us mining on windows have seen, the first GPU in the set of GPUs seems to be running slower than everyone else no matter what. I run 1050/1500 on GPU 1 and 1080/1500 on GPU 2 both with a TC of 21105… GPU 1 can’t run at 1080/1500 at all. Another piece of that puzzle is that I use the same OS on all of my mining rigs…none of them work with standard TC settings for miners, when set to 8192 for 7970s or 24000 for 7950s I get low hash rates.
[/quote]you can modify the voltage on those Gigabyte cards with VBE 7. i have 4 of them running at 1.05v and 1035 clock
-
Well I have had to run my rigs flat out for the last two weeks. I use them to heat the appartment 2br large living room and kitchen. It has been between -10 and 0 Degrees F outside almost every day. I have yet to turn the heat on in my apartment, instead I control the temp by how open the window in the computer room is.
