Mining rig with different card
-
I have a ming righ with a 850W PSU and 2 asus ati 5870 and it woks fine.
If I had a 5770 it is still working but if I replace the 5770 by a powercolor 6950 my windows crash or cgminer crash.
I tested with all the 3 cards connected and I try to mine only with the 6950 alone using guiminer: cgminer crash again. But if I have only the 6950 ang 5770 everything works.
I tried several version of the catalyst drivers.Is there a comptaibility issue or something that could explain that ? Or does anyone have a solution ?
Thanks
-
I had a similar issue. Did you overclock or underclock any of the cards? try running them all at stock speed. I had a r9 290 and a hd7950. when I OC the hd7950 is crash the AMD driver
-
No I did not tried to overclock or underclock them. So this config might work ?
Thanks
-
it could work, maybe the setting for the miners are incorrect?
-
I use guiminer’s settings for the 6950 (when you set in guiminer the card’s model, it sets by default intensity,…) when I tested it alone with the 2 others cards also connected to the motherboard. SO I guess these are correct. Are there any other settings I should use ?
Thanks, -
try lower intensity on the 6950.
-
Hi,
I tested again make it works :)
But now I have a lot of HW. Or I have to set a very low intensity but my hashrate is below the one I can get with 2x5870 and 1x5770.
Any ideas ?Thanks