[Dev] NeoScrypt GPU Miner - Public Beta Test
-
ive been running stable for 24h now
-
just noticed that windows miner shared here cannot go below -w 48 when -I 14, only giving hw errors then
miner that i compiled myself goes to -w 24 at -I 14 without hw errors, just now cant remember settings i used to compile
values between those will not work but 24 or 48 will
link to miner without anydlls:(if u want to test and play)
http://www.filedropper.com/cgminer-w24
(daimyo, this is not same version u have, size 597kb?)
-
cisa, i downloaded your compiled version -w 48 -I with the libraries
-
cisa, i downloaded your compiled version -w 48 -I with the libraries
this is new one, compiled with different settings
earlier was not stable for me, stuck after 20hours
now trying this one if its keeps up hashing for days
here it stucks:
waiting for work to be available from pools
so it could be pool problem, not miner?
edit:
tested miner to have best results with 14.xx drivers/13.xx bin
-
same settings 3.7.7b, -g 2 -w 48 -I 14, 13.xx drivers
280x hynix= 100khs
have u tried bin files crossed? freshalgo did best when 14.xx created bin at 13.x drivers
Awesome thanks!
Working for me too. Got 100kh/s on each of my R9 280x. 14.xx driver.
-
cgminer 3.7.7b in http://www.ftc-c.com/pack/testnet.rar , It had fixed some problem.
-
Tried lizhi’s new 3.7.7b with Radeon HD 6950
-g 2 -w 64 -I 14 = 4.45 KHS. WU = 4.1 2.04 KHS at the pool. Extremely unstable. Screen flickering… Had a hard time killing it.
-g 2 -w 64 -I 12 = 3.2 KHS. WU = 3.7. 2.99 KHS at the pool… Laggy, but stable (normal for mining).
-g 1 -w 64 -I 12 = 3.2 KHS. WU = 3.7. 3.1 KHS at the pool. Mining
-g 1 -w 48 -I 12 = GPU failure.
-g 1 -w 32 -I 12 = 3.92 KHS. WU = 4.3. 3.3 KHS at the pool. Mining.
-g 2 -w 32 -I 12 = 4.0 KHS. WU = 1.8. 2.6 KHS at the pool. Mining.
-g 1 -w 32 -I 10 = 1.9 KHS. WU - 1.9. 1.75KHS at the pool. Almost usable as a PC while mining.
-g 1 -w 24 -I 12 = GPU failure.
-g 1 -w 16 -I 12 = 2.8 KHS. WU = 2.5. 3.0 KHS at the pool. Mining.
Slightly better numbers, but not significantly. Stability seems a little better.
-
cgminer 3.7.7b in http://www.ftc-c.com/pack/testnet.rar , It had fixed some problem.
I’ve been using this for more than 24 hours without issue and no -T option either so it seems it is a good version Thank you
-
My neo p2pool ready , http://pool.ftc-c.com/
Now it support FTC-t, PXC
-
just for compare mining results
what is your best ever neoscrypt share?
Best share: 13.2M
-
What do you mean? The accepted shares amount? I am getting around 500k a day at 390 khs
-
I’ve been using this for more than 24 hours without issue and no -T option either so it seems it is a good version Thank you
It froze again at this post’s time. Back to the -T option
-
I have left the latest version on overnight, I am getting am 41khash/sec on my nvidia with compute 2.0. I think that is pretty good for an older card. I can get another 7khash/sec if the cpu miner is running on 3 threads. I get 12khash/sec with the cpuminer if I run on 4 threads and mine darkcoin with the gpu.
I still am getting higher cpu usage when the gpu miner is running. I think it runs a lot more stable if I leave one cpu thread free. This might be an area for improving stability in the next version. I think that cgminer right makes everything else run slow because it is using cpu and has a higher priority.
Another option for improvement would be to increase how much cpu that cg miner uses, but just add a setting for how many cpu threads to use. It might run better if one cpu thread is dedicated to all other programs, while cgminer is hashing and controlling the gpu with the other cpu threads.
(My start options are: -I 11 -w32 -g 2 )
-
What NVidia card are you running fragilefungi?
-
What do you mean? The accepted shares amount? I am getting around 500k a day at 390 khs
370k shares 24hours at 284khs, compares almost equal to your shares
single best share 13.2M, getting like 2-3 +10M shares a day, is it too much luck?
WU value is out of control, its showing what ever it likes
-
I’ve pointed some mining power to theblocksfactory on the PXC pool :-)
-
I’ve pointed some mining power to theblocksfactory on the PXC pool :-)
2.18 MH/s?
-
I’ve pointed some mining power to theblocksfactory on the PXC pool :-)
2.18 MH/s?
Yep :-)
But just moved most of it over to p2pool
-
Having the best luck as mentioned earlier by using bin files created with 13.11 and then installing the 14.X drivers. Seems that the R9 290 doesn’t understand the -g 2 option without the newer drivers installed (makes a big difference in hash rate for the R9 290). I’ve got my 7950’s hashing at 85Kh/s and my R9 290 (hynix) at 111Kh/s. using -g 2, -I 13 (7950’s), 14 (r9 290) and -w 32 for both. My 7950’s are OC’d, the 290 is running stock clocks and undervolted. Running 3.7.7b.
-
How did you undervolt the 290 ?
