NSGminer v0.9.2: The Fastest Feathercoin / NeoScrypt GPU Miner

ghostlander

NSGminer v0.9.2 released. Well optimised for any drivers. Enjoy.

https://bitcointalk.org/index.php?topic=712650.msg13953935#msg13953935

mirrax

NSGminer v0.9.2 released. Well optimised for any drivers. Enjoy.

https://bitcointalk.org/index.php?topic=712650.msg13953935#msg13953935

Thank you Ghostlander! I am not a miner, but will send you few more FTC later on :+1:

RIPPEDDRAGON

That fixed my slow r9 290!

FlatBlack

oraleee… again…Big thumbs up…!

Also see that FTC price is changing… ;3)
hope it will climbing n stay above 0.00002BTC something…

p/s - NSGminer v0.9.2 speed around 30 minutes running.
3 x R9 290, 1 x R9 290 Trix, Driver-15.7.1
http://imagizer.imageshack.com/img922/9353/xwiOFJ.jpg

ghostlander

http://www.dualminer.com/iBeLink-DM384M-Dash-Miner_p_36.html

If what they advertise is true, 384MH/s for 715W and $2098 in cash, say good-bye to X11 GPU mining. A reference R9 280X outputs 2MH/s for maybe 150W. If they produce enough of these ASICs for themselves, they can do a 51% attack on any X11 coin including Dash.

RIPPEDDRAGON

@ghostlander said:

http://www.dualminer.com/iBeLink-DM384M-Dash-Miner_p_36.html

If what they advertise is true, 384MH/s for 715W and $2098 in cash, say good-bye to X11 GPU mining. A reference R9 280X outputs 2MH/s for maybe 150W. If they produce enough of these ASICs for themselves, they can do a 51% attack on any X11 coin including Dash.

You think that miner is legit or another preorder scam? It is from Dualminer…so it might be real.

ghostlander

@RIPPEDDRAGON Who knows. They say it’s in stock, not a pre-order.

RIPPEDDRAGON

@ghostlander

Just ran some #s, its a super risky gamble and imo not worth it. Apparently the chip is on a 150nm process too, so hashrate will go up orders of magnitude on the next several gen x11 asics.

ghostlander

@RIPPEDDRAGON I’m sure they use the most inexpensive process and cheapest multiproject wafers. Dash is only $25M in market capitalisation which is way lower than Litecoin back in 2014. On the other hand, X11 is much easier to get into silicon than Scrypt. All those SHA-3 contestants aren’t memory hard even remotely.

mekhane

I am glad to say that after a while trying to set up my AMD with one R9 380 sapphire card miner running on debian, I have finally achieved my goal and it is making about 300 KH/s with nsgminer v0.9.2 (That is plain start command with no tweaking yet but intensity…). Thanks ghostlander (and everyone involved) for keeping up the work. FTC rules!

RIPPEDDRAGON

@mekhane said:

I am glad to say that after a while trying to set up my AMD with one R9 380 sapphire card miner running on debian, I have finally achieved my goal and it is making about 300 KH/s with nsgminer v0.9.2 (That is plain start command with no tweaking yet but intensity…). Thanks ghostlander (and everyone involved) for keeping up the work. FTC rules!

I believe that card is a hd 7950 child card, you should be able to get into the 400s no problem.

mekhane

@RIPPEDDRAGON
yes, I will try to test changing some parameters to get more. It does make 400 and more sometimes, spectially if I keep it with fresh air in… I am just happy to have it going, I am not much of an expert, so I get happy just to see it run!

FlatBlack

*update

-NSGminer v0.9.2 speed around 2 and half hour running.
-3 x R9 290, 1 x R9 290 Trix, Driver-15.12 (Win 7 64 bit)
http://imagizer.imageshack.com/img921/4411/XKnPHu.jpg

AmDD

@FlatBlack said:

*update

-NSGminer v0.9.2 speed around 2 and half hour running.
-3 x R9 290, 1 x R9 290 Trix, Driver-15.12 (Win 7 64 bit)
http://imagizer.imageshack.com/img921/4411/XKnPHu.jpg

very nice! Im jealous! With the new nsgminer I was able to get my 7950s up to almost 400 (about 386KH/s)

ghostlander

I have compiled and uploaded 32-bit Windows binaries just in case someone needs them. There is no NVIDIA support compiled in because NVML is for 64-bit Windows only starting with Vista (both 32-bit and 64-bit Linux are alright though).

FlatBlack

@AmDD said:

@FlatBlack said:

*update

-NSGminer v0.9.2 speed around 2 and half hour running.
-3 x R9 290, 1 x R9 290 Trix, Driver-15.12 (Win 7 64 bit)
http://imagizer.imageshack.com/img921/4411/XKnPHu.jpg

very nice! Im jealous! With the new nsgminer I was able to get my 7950s up to almost 400 (about 386KH/s)

just sharing d info with d latest amd driver…not purpose for ‘showing-off’… :o)
re u solo-mining or pool mining,fren…?

AmDD

@FlatBlack said:

@AmDD said:

@FlatBlack said:

*update

-NSGminer v0.9.2 speed around 2 and half hour running.
-3 x R9 290, 1 x R9 290 Trix, Driver-15.12 (Win 7 64 bit)
http://imagizer.imageshack.com/img921/4411/XKnPHu.jpg

very nice! Im jealous! With the new nsgminer I was able to get my 7950s up to almost 400 (about 386KH/s)

just sharing d info with d latest amd driver…not purpose for ‘showing-off’… :o)
re u solo-mining or pool mining,fren…?

Im mining on my p2pool http://104.236.34.9:19327/static/

RIPPEDDRAGON

@ghostlander Just solved one of my rigs freezing… whenever it solves a block it fail to get new work and kills nsgminer and sometimes takes the rig with it. Don’t have a fix for this yet, looking more into it.

FlatBlack

*update

NSGminer performance using amd-driver
Crimson Edition-Hotfix 16.2.1, Running around +/- 6 hours
As picture below attached
alt text

*as im still at ‘beginner-level’, had experiencing so far ‘no-blackout @ other problem’ using custom-installation option, with just only AMD Display Driver or with combination with Audio Driver/CCC or all of 3 on Windows 7 64 bit

asking an opinion from ‘experienced’ n ‘earlier gpu-miner’, so far as conclusion…NSGminer 0.9.2 (Windows platform) is compatible with d latest AMD Driver…?

AcidD

@FlatBlack what does your miner config look like for that ? and do you know how much power you’re drawing ?