XFX R9280x anyone running? What kind of rates?
-
[quote name=“aatje92” post=“44534” timestamp=“1387096918”]
Try engine 1050 mem 1750 thread concurrency 8192 gpu-threads 2. HAve a 7970 but maybe it works for you.
[/quote]What’s your work size, thread concurrency, and so on?
-
[quote name=“aatje92” post=“44542” timestamp=“1387098801”]
With the settings above, i’m getting 730 kh/s on my ‘old’ XFX HD7970 :p
[/quote]then you have one of the few early XFX that is outside of their mainstream versions:)
-
[quote name=“aatje92” post=“44557” timestamp=“1387104084”]
What intensity?
[/quote]7970/280X should allways be i 13, higher throws hw error and is no point.
-
I’ve got my suspicions that the card can actually run stable on higher clocks, and push out around 700 if one play around a little with the volt settings. However, the win in this can be discussed as the card will cost more power that it might be worth.
As for me, I prefer a stable 600 from that card rather than 700 that crashes on me all the time :)
-
[quote name=“aatje92” post=“44534” timestamp=“1387096918”]
Try engine 1050 mem 1750 thread concurrency 8192 gpu-threads 2. HAve a 7970 but maybe it works for you.
[/quote]Thanks. I’ll try that. Seems odd running the engine clock lower than stock though. (1080)
-
[quote name=“aatje92” post=“44542” timestamp=“1387098801”]
With the settings above, i’m getting 730 kh/s on my ‘old’ XFX HD7970 :p
[/quote]Any chance you could share your full config please?
-
[quote name=“svennand” post=“44582” timestamp=“1387108497”]
[quote author=aatje92 link=topic=6015.msg44542#msg44542 date=1387098801]
With the settings above, i’m getting 730 kh/s on my ‘old’ XFX HD7970 :p
[/quote]then you have one of the few early XFX that is outside of their mainstream versions:)
[/quote]Lucky me :D. I also flashed it with a sapphire bios i believe. [quote author=specter link=topic=6015.msg44572#msg44572 date=1387106663]
[quote author=aatje92 link=topic=6015.msg44534#msg44534 date=1387096918]
Try engine 1050 mem 1750 thread concurrency 8192 gpu-threads 2. HAve a 7970 but maybe it works for you.
[/quote]What’s your work size, thread concurrency, and so on?
[/quote]thread concurrency is 8192 as in my post, worksize etc is all default.
-
A friend of mine made a few tweaks to my cards and got them above 700Kh/s
I=13, gpu=1000, mem=1500, gpu threads=2
Everything else is stock. These cards are Very temperature sensitive, the more cold air you can get on them the higher the hashrate. -
I have 2 x XFX R280X on my second rig. For what they cost I’m quite pleased with the performance.
These are stable and can be undervolted.
Achieving just short of 700Kh/s with no HW errors. From what I can see they delivery no more if you clock the gpu beyond 1000.
As above:
I=13, gpu=1000, mem=1500, gpu threads=2
Running at 72 degrees. Luckily the ambient air temp in my garage is fairly low around West Yorkshire at this time of year.
-
[quote name=“scruffters” post=“47673” timestamp=“1388080062”]
I have 2 x XFX R280X on my second rig. For what they cost I’m quite pleased with the performance.These are stable and can be undervolted.
Achieving just short of 700Kh/s with no HW errors. From what I can see they delivery no more if you clock the gpu beyond 1000.
As above:
I=13, gpu=1000, mem=1500, gpu threads=2
Running at 72 degrees. Luckily the ambient air temp in my garage is fairly low around West Yorkshire at this time of year.
[/quote]I have mine running in my upstairs office which has no hvac ductwork so it tends to be cooler anyway. (North Central US)
Today I finally got around to setting up some flexible 4" PVC drain pipe running along the wall behind my desk so that it is closed under the inside window with an old computer case 4" fan drawing cold air (5F-20F) into the pipe. I have styrofoam taped up tight to the window to close the gap but let a couple inches open on the opposite end so warm air can be drawn in to mix with cold air. The at the output end of pipe I have another small 4" desk fan drawing the cool air out and directly onto my two cards.
This is a temporary solution to keep temps lower until my riser cable arrives. I am now getting a minimum of 1390KH/s with many rises of 1440-1480KH/s for the two cards combined.
I’ve been mining with give-me-coins.com